For more than 30 years Controlmatik-ABW Slovenia has been developing and manufacturing devices for dosing gas and fluid chlorine in water, continuous measurement of chlorine quantity in water and measurement of the presence of chlorine in the air. It aslo develops and produces equipment for chlorine neutralization in the air, and in case of uncontrolled leakage in the air from the system. A constant process of development and existance of long-lasting experience are a guarantee for technical perfection and outstanding quality of their products.
Dosing Aggressive Fluids:
Controlmatik-ABW devices for dosing aggressive fluids are METERING PUMPS. Metering pumps and acessories for dosing aggressive liquids are manufactured by the German manufacturer ELADOS.
ELADOS EMP metering pums are piston, self-ventilating pumps with a special electrical motor drive and a positive subpressure widely used in technological processes in water treatment industry. Since the materials of high quality are used for manufacturing metering pumps they can be used for dosing various aggressive liquids. Using different types of controllers, the pumps can be employed in a sequence of operative procedures for quantitative and proportional metering. Metering pumps have proven their quality in actual operating conditions and applications.
ELADOS EMP dosing pums can offer a wide range of dosage possibilites and control options.
ELADOS ® EMP II
Electric motor-driven diaphragm pump for dosing capacity 1,4 - 24,0 l/h
Technical data
ELADOS ® EMP III
Electric motor-driven diaphragm pump for dosing capacity 16 - 54 l/h or 80 – 120 l/h
Technical data
ELADOS ® EMP IV
Electric motor-driven diaphragm pump for dosing capacity 140 - 210 l/h or 450 - 750 l/h
Technical data 140 - 210 l/h
Technical data 450 - 750 l/h
ELADOS ® EMP-KKS
ELADOS EMP-KKS diphragm-type-metering pumps are efficient precision-metering units for chemicals which have tendency to degas. On the basis of technical unit with a pre-delivery diaphragm and a sealless ceramic-piston-cylinder unit, the smallest possible metered quantity is achieved with high reproducibility - with the maximum number of strokes. Like the ELADOS EMP diaphragm-metering pump range, they can be adjusted to any operational requirements on the basis of a variety of control options for quantitative and proportional metering.
Electric motor-driven diphragm-type metering pump with pre-delivery
for dosing capacity 0,2 - 1,4 l/h
Complete dosing equipment for liquid chlorine dioxide CIO2
Dosing system for liquid chlorine dioxide CIO2 consists of:
- Chlorine dioxide analyzer M 1053 ClO2 on-line chlorine dioxide measurement
• PI regulation included
• galvanicaly separated current outputs
• easy assembling and managment
• IP 65 housing
Dosing pump
• Barrel
• TwinOxide (Chlordioxide solution A and B component)
•Twinoxide is an advanced delivery system to generate 99.9% pure
chlorine dioxide in an aqueous 0.3% solution allows a full replacement of
chlorine sublime disinfection results.
|